Mini vmac tutorial 6.0.8 install#
Mini vmac tutorial 6.0.8 drivers#
Mini vmac tutorial 6.0.8 trial#

Most of these old browsers are too slow and buggy to be used on modern websites, due to the introduction of new HTML elements that are not understood by the browsers. MacShell, a terminal for System 7.5.5, albeit not useful because it only accepts simple command like man: selected menu with a different background color). Some DOS applications also appear to run in monochrome, but perhaps due to poor design, it is difficult to distinguish between certain screen elements (e.g.

Mini vmac tutorial 6.0.8 trial#

The DOS keyboard mapping in Soft PC is also weird and I am not sure where to configure it correctly, other than by trial and errors. However, when mouse emulation is enabled, the speed is too slow to be used.

As long as the folder does not have a lot of files and approach DOS 3.3 file system limitation, it will work. The easiest way is to use HFVExplorer to copy DOS applications onto a folder in the Mac hard drive and configure Soft PC to emulate a network drive pointing to that folder. However, it does not work because the Mac resource fork is lost during the copying process, and the modified image is not recognized by SoftPC as a hard disk image. I tried to use HFVExplorer copy the disk image to my PC, use WinImage to add files to the image and import it back to the emulated Mac. When setting up a new emulated hard drive, Soft PC will create a hard drive image file on the system drive. Emulating a floppy drive requires access to a physical floppy drive, which is not emulated by Mini vMac. How did I get these DOS applications to appear in Soft PC in the first place? Soft PC provides three ways, configurable from the Setup menu, for the emulated PC to access data, via floppy disk, hard disk, or a network drive.

Mini vmac tutorial 6.0.8 install#

I downloaded many of them from an abadonware website and install on my vMac: What would a computer be without some games? Well, there were plenty of games, both text and graphics, for the Macintosh Plus. In the end, I used a stereo audio loopback cable that connects the speaker output port to the line-in port, and the audio was recorded perfectly.

Mini vmac tutorial 6.0.8 drivers#

It could be due to Windows 8, or due to the Mac Mini Bootcamp drivers for Windows. I also tried a suggestion of recording from the microphone using the Stereo Mix option, only to find that no such option exists on my machine. This error is mentioned in the official website, with no solution available. Although CamStudio supports recording of audio output from the speaker, attempting to select Option > Record audio from speakers results in an error message “WaveoutGetSelectControl() failed.”. The above clips were captured using CamStudio for Windows. The PC did not come bundled with sound hardware, other than the PC speaker, until years later. It is amazing considering that the audio on a Macintosh Plus is generated using a 8-bit DAC at 22kHz sampling rate. See the following video and notice how the application says “Goodbye” when you choose to quit. After much effort I managed to grab a working version and make the Plus speak. Surprisingly there is a text-to-speech tool called Voice Box available for the Plus. This is probably very hard to find nowadays – MacroMind MusicWorks allows you to compose songs:Īnd MacroMind VideoWorks allows you to design nice animations that are playable on the Plus:Īnother VideoWorks video, this time with audio: